Portable appliance testing (PAT) is the term used to describe the examination of electrical appliances and equipment to ensure they are safe to use. Most electrical safety defects can be found by visual examination but some types of defect can only be found by testing. However, it is essential to understand that visual examination is an essential part of the process because some types of electrical safety defect can't be detected by testing alone.

A relatively brief user check (based upon simple training and perhaps assisted by the use of a brief checklist) can be a very useful part of any electrical maintenance regime. However, more formal visual inspection and testing by a competent person may also be required at appropriate intervals, depending upon the type of equipment and the environment in which it is used

(HSE)

The Electricity at Work Regulations 1989 require that any electrical equipment that has the potential to cause injury is maintained in a safe condition.

PAT Testing is the best practice that helps to identify any faults of the electrical equipment so you can repair or replace it when necessary.

We are committed to keep our pricing simple and straight forward.

We charge £60 fixed price that includes the test of the first 5 appliances and an additional £1.50 per item thereafter.

If an appliance failsits test, we repair it for you for an additional price and will re-test for no extra cost.

The person doing testing work needs to be competent to do it. In many low-risk environments, a sensible (competent) member of staff can undertake visual inspections if they have enough knowledge and training. However, when undertaking combined inspection and testing, a greater level of knowledge and experience is needed, and the person will need:

the right equipment to do the tests

the ability to use this test equipment properly

the ability to properly understand the test results

(HSE)

Origo Property Solutions are committed to the compliance of all relevant legislations and industry standards and makes sure that anyone who carries out PAT testing completes the necessary industry standard trainings and holds the appropriate certification of competency.

• In any workplaces

• In any environment accessible to the public (schools, shops, hotels etc.)

• In rented accomodations

The frequency of inspection and testing depends upon the type of equipment and the environment it is used in.

This frequency can range from 3 months to 5 years. We are happy to advise based on your particular circumstances.

We will issue a PAT testing Certificate and a PAT testing report that contains all the tested equipment and their test results.